Job Label Template
Contents
Job Label Template
This section will cover how to create a job label, so that it is bespoke to each customer.
The following information will be able to be input into the new job label.
Orientation
Enter here if you would like the label to be portrait or landscape.
Width
Enter here the width of the label. This value will be recorded in mm, as a whole number.
Length
Enter here the length of the label. This value will be recorded in mm, as a whole number.
Line 1 - 13
On the each line of the label, the following details can be input: Label, Value, the blank column can be used to input the values stated below, Separator, Display Type, Active and Alignment.
Label
On lines 1 - 13 the label details can be modified. Enter here the label type, which should correspond with the following Value section.
Value
On lines 1 - 13 the value details can be selected, from the drop-down menu. This should correspond to the previous Label section.
Blank Column
On lines 1 - 13 this column can be used to input text, if promoted to by the Value column, or the following variables.
{first_off} - Replaced with an "X" if the label is "First Off" label.
{production} - Replaced with an "X" if the label is a "Production" label.
{last_off} - Replaced with an "X" if the label is a "Last Off" label.
{stock_img} - Replaced with an image of the Stock Item.
{logo_img} - Replaced with your logo.
Separator
On lines 1 - 13 the separator details can be modified. Enter here the appropriate separator, from the drop-down menu.
Display Type
On lines 1 - 13 the separator details can be modified. Enter here the appropriate display type, from the drop-down menu.
Active
On lines 1 - 13 the separator details can be modified. Enter here if you would like each line to be active or not. Tick 
for Yes or leave blank 
for No.
Alignment
On lines 1 - 13 the separator details can be modified. Enter here the appropriate alignment, from the drop-down menu.
Update Job Label Template
Once the job label template has been updated, press the 
button to save changes.
